Any battery or accessory you purchase from us is guaranteed!
- 100% Original Manufacturer Compatible
- Guaranteed to Meet or Exceed Original Specifications
- Full 1 Year Warranty (unless otherwise stated)
Our batteries are made using the highest quality cells available and utilize all
of the proper logic boards, thermal protectors, thermistors and circuit breakers to
ensure the highest levels of battery safety, reliability and efficiency.
In order to guarantee optimal battery life and performance we highly recommend you
read the new battery instructions below:
Battery Topics
The links below will give you a quick battery introduction. This information
applies to the consumer electronics NiCad, NiMH and Li-Ion batteries, unless
otherwise stated.
Battery Care Instructions
- New Battery Instructions
- Battery Do Nots
- What Are The Different Types of Rechargeable
Battery Chemistries/Technologies?
- What is the "Memory Effect”?
- Is it Possible to Upgrade my Device’s
Battery to a Newer Chemistry?
- My New Battery Isn’t Charging - What’s
the Deal?
- How Can I Maximize Battery Performance?
- How Are Batteries Rated? (What Are
Volts and Amps?)
- How Long Do Batteries Last? (What is
the Life Span of My New Battery?)
- Should I Recycle My Old Battery? How?
Laptop and Desktop Computer Batteries
- What are Main Batteries?
- What are CMOS or Clock Batteries?
- Is it Difficult to Replace CMOS or Clock
Batteries?
- What are RAM or Resume Batteries?
- How Long Will the New Main Battery Power
My Laptop?
- Is it Possible to Upgrade My Device’s
Battery to a Newer Chemistry?
- What is a “Smart” Battery?
- How Can I Maximize Battery Performance?
- How Long Do Batteries Last? (What’s
the Life Span of My New Battery)?
- My New Battery Isn’t Charging - What’s
the Deal?
Battery Care Instructions
New Battery Instructions:
Your new battery comes in a discharged condition and must be charged before use (refer to your devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the battery may require three to four charge/discharge cycles before achieving maximum capacity.
- When charging the battery for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Simply remove the battery from the device, reinsert it and repeat the charging procedure.
- It is important to condition (fully discharge and then fully charge) the battery every two to three weeks. Failure to do so may significantly shorten the battery’s life. (Note: this does not apply to
SLA
or Li-Ion batteries, which do not require conditioning). To discharge, simply run the device under the battery’s power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in your user’s manual.
- If the battery will not be in use for a month or longer, it is recommended that it be removed from the device and stored in a cool, dry, clean place.
- It is normal for a battery to become warm to the touch during charging and discharging.
- A charged battery will eventually lose its charge if unused. It may therefore be necessary to recharge the battery after a storage period.
- The milliamp-hour (mAH) rating of our battery will often be higher than the one on your original battery. A higher mAH rating is indicative of a longer lasting (higher capacity) battery and will not cause any incompatibilities. Our battery will, in most cases, outperform the original by 30% to 50%.
- Actual battery run-time depends upon the power demands made by the equipment. In the case of notebook computers, the use of the monitor, the hard drive, and other peripherals results in an additional drain upon the battery, effectively reducing the battery’s run-time. The total run-time of the battery is also heavily dependent upon the design of the equipment. To ensure maximum performance of the battery, optimize your computer’s power management features. Refer to your computer manual for further instructions on how to do this.
Return to Top
Battery Do Nots:
- Do not short-circuit any battery. A short-circuit may cause severe damage to the battery.
- Do not drop, hit or otherwise abuse the battery as this may result in the exposure of the cell contents, which are corrosive.
- Do not expose the battery to moisture or rain.
- Keep the battery away from fire or other sources of extreme heat. Do not incinerate. Exposure of the battery to extreme heat may result in an explosion.
Return to Top
What Are The Different Types of Rechargeable Battery Chemistries/Technologies?
Batteries in portable consumer devices (laptops and notebooks, camcorders, cellular phones, etc.) are principally made using either Nickel Cadmium (NiCad), Nickel Metal Hydride (NiMH) or Lithium Ion (Li-Ion) technologies. Each type of rechargeable battery technology has its own unique characteristics:
- NiCad and NiMH:
The main difference between the two is the fact that NiMH batteries (the newer of the two technologies) offer higher energy densities than NiCads. In other words, pound for pound, NiMH delivers approximately 100% more capacity than its NiCad counterpart. What this translates into is increased run-time from the battery with no additional bulk to weigh down your portable device. NiMH also offers another major advantage: NiCad batteries tend to suffer from what is called the "memory effect". NiMH batteries are less prone to develop this dreaded affliction and thus require less maintenance and care. NiMH batteries are also more environmentally friendly than their NiCad counterparts since they do not contain heavy metals (which present serious landfill problems).
- Li-Ion:
Li-Ion has quickly become the emerging standard for portable power in consumer devices. Li-Ion batteries produce the same energy as NiMH batteries but weigh approximately 35% less. This is crucial in applications such as camcorders or notebook computers where the battery makes up a significant portion of the device’s weight. Another reason Li-Ion batteries have become so popular is that they do not suffer from the memory effect AT ALL. They are also better for the environment because they don’t contain toxic materials such as Cadmium or Mercury.
Return to Top
What is the "Memory Effect”?
NiCad batteries, and to a lesser extent NiMH batteries, suffer from what’s called the "memory effect". What this means is that if a battery is continually only partially discharged before recharging, the battery "forgets" that it has the capacity to further discharge all the way down. To illustrate: If you, on a regular basis, fully charge your battery and then use only 50% of its capacity before the next recharge, eventually the battery will become unaware of its extra 50% capacity which has remained unused. Your battery will remain functional, but only at 50% of its original capacity. The way to avoid the dreaded "memory effect" is to fully cycle (fully charge and then fully discharge) your battery at least once every two to three weeks. This applies to NiCad and NiMH consumer electronics batteries only. Batteries can be discharged by unplugging the device’s AC adapter and letting the device run on the battery until it ceases to function. This will insure your battery remains healthy.
Return to Top
Is it Possible to Upgrade my Device’s Battery to a Newer Chemistry?
NiCad, NiMH and Li-Ion are all fundamentally different from one another and cannot be substituted unless the device has been pre-configured from the factory to accept more than one type of rechargeable battery technology. The difference between them stems from the fact that each type requires a different charging pattern to be properly recharged. Therefore, the portable device’s internal charger must be properly configured to handle a given type of rechargeable battery.
Refer to your owners manual to find out which rechargeable battery types your particular device supports or simply use our yellow "Search" bar at the top of the page to find your device in our database. It will automatically list all of the battery types supported by your machine.
Return to Top
My New Battery Isn’t Charging - What’s the Deal?
New batteries are shipped in a discharged condition and must be charged before use. We generally recommend an overnight charge (approximately twelve hours). Refer to your user’s manual for charging instructions. Rechargeable batteries should be cycled - fully charged and then fully discharged - two to four times initially to allow them to reach their full capacity. (Note: it is normal for a battery to become warm to the touch during charging and discharging).
New batteries are hard for the device to charge; they have never been fully charged and are therefore "unformed". Sometimes your device’s charger will stop charging a new battery before it is fully charged. If this happens, simply remove the battery from your device and then reinsert it. The charge cycle should begin again. This may happen several times during the first battery charge. Don’t worry; it’s perfectly normal.
Return to Top
How Can I Maximize Battery Performance?
There are several steps you can take to insure that you get maximum performance from your battery:
- Breaking In New Batteries
New batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity. This applies only to NiCad and NiMH consumer electronics batteries.
- Prevent the Memory Effect
Keep your battery healthy by fully charging and then fully discharging it at least once every two to three weeks. This applies to NiCad and NiMH consumer electronics batteries only. Exceptions to the rule are Li-Ion batteries and
SLA
batteries which do not suffer from the memory effect.
- Keep Your Batteries Clean
It’s a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and your portable electronic device.
- Exercise Your Battery
Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.
- Battery Storage
If you don’t plan on using the battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. NiCad, NiMH and Li-Ion batteries will self-discharge during storage; remember to break them in before use. Sealed Lead
Acid(SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store
SLA
batteries for more than three months.
- For Notebook Users
To get maximum performance from your battery, fully optimize the notebooks power management features prior to use. Power management is a trade off: better power conservation in exchange for lesser computer performance. The power management system conserves battery power by setting the processor to run at a slower speed, dimming the screen, spinning down the hard drive when it’s not in use and causing the machine to go into sleep mode when inactive. Your notebook users guide will provide information relating to specific power management features.
Return to Top
How Are Batteries Rated? (What Are Volts and Amps?)
There are two ratings on every battery: volts and amp-hours (AH). The AH rating may also be given as milliamp-hours (mAH), which are one-thousandth of an amp-hour (for example, a 1AH battery is 1000mAH). The voltage of the new battery should always match the voltage of your original. Many of our batteries will have higher amp-hour ratings than the original battery found in your device. This is indicative of a longer running time (higher capacity) and will not cause any incompatibilities.
Return to Top
How Long Do Batteries Last? (What is the Life Span of My New Battery)?
The average life of a properly cared for rechargeable battery operating under normal conditions is generally between 500 to 800 charge-discharge cycles. This translates into one and a half to three years of battery life for the average user. As your rechargeable battery begins to die, you will notice a decline in the running time of the battery. When your two hour battery is only supplying you with an hour’s worth of use, it’s time for a new one.
Return to Top
Should I Recycle My Old Battery? How?
NiCad, NiMH,
SLA and Li-Ion batteries should be recycled. Be environmentally conscious - do NOT throw these batteries in the trash.
If you don’t know where your local recycling facility is, call the Portable Rechargeable Battery Association at 1-800-822-8837. They will provide you with the address of the recycling center nearest to you.
Return to Top
Click Here to download
“What Is The Best Battery?” for more great battery information!
NOTE: For information you won’t find anywhere else, be sure to request the FREE “Care Tips and Secrets” when you place your order. See what Peter G. of San Francisco had to say about this information in
the “Testimonials” web page. Once you’ve read this information, you’ll understand why we don’t just put it here for all to see.
Laptop and Desktop Computer Batteries
What are Main Batteries?
The main battery (also called the power battery) is the battery pack which allows a laptop or notebook to operate independently of an AC power source. These rechargeable batteries are designed to operate the computer for a certain amount of time (generally 1 to 4 hours). Click here for more information on battery run-time.
Return to Top
What are CMOS or Clock Batteries?
CMOS & Clock Backup batteries perform the same function in desktop and laptop computers: when the computer is turned off, the battery maintains the time and date, insuring their accuracy when the system is once again restarted. More importantly, the battery saves the computers BIOS setup configuration, which allows the system to efficiently reboot once it is restarted. The computer knows what type of hard drive it is dealing with, etc. Not surprisingly, these batteries are known alternatively as CMOS batteries, Real Time Clock (RTC) batteries, or simply internal batteries.
The most common CMOS battery chemistries are Lithium, Nickel Cadmium (NiCad) and alkaline. They are usually somewhere in the 3 to 7.2 volt range and either solder onto the motherboard or plug in via a snap-in connector (depending upon the computer manufacturers design).
CMOS batteries generally last for two to three years, although some (especially the lithium type) have been known to last much longer. Ironically, the less the computer is used the faster the CMOS battery will run out. This is because when the computer is turned off the battery begins to function. It is recommended to replace the CMOS battery approximately once a year or when servicing the computer. If the computer has been idle for an extended length of time it is a good idea to change the battery. Changing the battery is a relatively easy and inexpensive task, especially (as I’m sure many of you out there know) when compared to trying to reboot and reconfigure a computer which has lost its BIOS settings.
Return to Top
Is it Difficult to Replace CMOS or Clock Batteries?
In most cases, replacement of the CMOS battery is an easy task. It is simply a matter of locating the battery on the computer’s motherboard, removing it and plugging in a new one. As a rule, internal batteries should be replaced by the same type of battery which was originally used in the machine or according to the manufacturers specifications. The major exception to this rule are older PCs which were manufactured with a NiCad battery soldered onto the motherboard. These computers usually have a three or four pin male plug, with two of the pins connected via a jumper (this is generally found in the same area of the motherboard as the original battery). This plug gives you the option of leaving the soldered battery in place and replacing it with a plug-in type battery. Removing the jumper tells the computer to ignore the battery soldered onto the motherboard and to look to the pins for its power source. If the motherboard has this provision, you can usually install a standard PC plug-in battery instead of removing the soldered battery and re-soldering a new one (the standard PC plug-in battery is part number B-220 (lithium) or B-116 (alkaline). These batteries are interchangeable). A word of warning: some computers have 4 pins on the motherboard, whereas today’s plug-in batteries come with a 3 pin connector (one of the pinholes is closed in order to prevent the user from inadvertently plugging the battery in with reversed polarity). If this is the case, you should clip the pin from the motherboard that corresponds to the sealed pinhole on the battery plug. That pin is nonfunctional and by clipping it you ensure that future batteries will not be installed on the motherboard with reversed polarity. If in any doubt about replacing the motherboard battery, connections, or polarity, have a qualified service technician advise you. Installing the battery with reversed polarity may seriously damage your battery or motherboard.
IMPORTANT NOTES:
NiCad batteries are rechargeable, whereas Lithium and alkaline batteries are NOT. Therefore, Lithium and alkaline batteries must be replaced by equivalent batteries of the same type. Attempting to replace these non-rechargeable batteries with a NiCad will result in a non-functioning battery because the computer lacks the proper charging circuitry to charge the NiCad battery.
If a motherboard lacks the above-discussed male pins for an external battery, the NiCad battery MUST be unsoldered and replaced by a NiCad battery ONLY. Attempting to use an alkaline or lithium battery in place of a NiCad on such a board could be hazardous. These batteries are not designed to be recharged, and an attempt to do so may cause the battery to "burst", or explode, or damage the motherboard.
Return to Top
What are RAM or Resume Batteries?
Some notebook computers are designed with a dedicated battery for backing up RAM (random access memory) functions when the machine temporarily loses power from the main battery. This feature allows users to change the main battery pack without losing the current applications and settings residing in RAM. This is called a "battery hot swap" - switching the main battery pack without having to turn off the computer.
These types of batteries are alternately known as bridge batteries, RAM batteries, auxiliary batteries or resume batteries.
Most RAM batteries are rechargeable NiCad or NiMH and will last around 2-3 years. It is recommended that you replace your notebook’s RAM battery when replacing the CMOS battery.
Return to Top
How Long Will the New Main Battery Power My Laptop?
Battery run-time on a laptop is difficult to determine. Actual battery running time depends upon the power demands made by the equipment. The use of the screen, the hard drive and other accessories results in an additional drain upon the battery, effectively reducing its running time. The total running time of the battery is also dependent upon the design of the equipment. Generally, one of our new Hi-Capacity batteries will run 30% to 50% longer than the old battery did when it was new.
Return to Top
Is it Possible to Upgrade My Device’s Battery to a Newer Chemistry?
The NiCad, NiMH and Li-Ion are all fundamentally different technologies and cannot be substituted for one another unless the device has been pre-configured from the factory to accept more than one type of rechargeable battery. The difference between them stems from the fact that each type requires a different charging pattern to be properly recharged. Therefore, the device’s charger must be properly configured to handle a given type of rechargeable battery.
Refer to your owners manual to find out which rechargeable battery types your particular device supports or simply use our “Quick Find” search engine to find your device. It will automatically list all of the battery types supported by your machine.
Return to Top
What is a “Smart” Battery?
Smart batteries have internal circuit boards with smart chips which allow them to communicate with the computer and monitor battery performance, output voltage and temperature. Smart batteries will generally run 15% longer due to their increased efficiency and also give the computer much more accurate "fuel gauge" capabilities to determine how much battery running time is left before the next recharge is required.
Return to Top
How Can I Maximize Battery Performance?
There are several steps you can take to insure that you get maximum performance from your
battery:
- Breaking In New Batteries
New batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity. This applies to NiCad and NiMH consumer electronics batteries.
- Preventing the Memory Effect
Keep your battery healthy by fully charging and then fully discharging it at least once every two to three weeks. This applies only to the NiCad and NiMH consumer electronics batteries. Exceptions to the rule are Li-Ion batteries and
SLA batteries which do not suffer from the memory effect.
- Keep Your Batteries Clean
It’s a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and your electronic device.
- Exercise Your Battery
Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.
- Battery Storage
If you don’t plan on using the battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. NiCad, NiMH and Li-Ion batteries will self-discharge during storage; remember to break them in before use. Sealed Lead Acid
(SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store
SLA batteries for more than three months.
- For Notebook Users
To get maximum performance from your battery, fully optimize the notebooks power management features prior to use. Power management is a trade off: better power conservation in exchange for lesser computer performance. The power management system conserves battery power by setting the processor to run at a slower speed, dimming the screen, spinning down the hard drive when it’s not in use and causing the machine to go into sleep mode when inactive. Your notebook users guide will provide information relating to specific power management features.
Return to Top
How Long Do Batteries Last? (What’s the Life Span of My New Battery)?
The average life of a properly cared-for rechargeable battery operating under normal conditions is generally between 500 to 800 charge-discharge cycles. This translates into one and a half to three years of battery life for the average user. As your rechargeable battery begins to die you will notice a decline in the running time of the battery. When your two hour battery is only supplying you with an hour’s worth of use, it’s time for a new one.
Return to Top
My New Battery Isn’t Charging - What’s the Deal?
New batteries are shipped in a discharged condition and must be charged before use. We generally recommend an overnight charge (approximately twelve hours). Refer to your user’s manual for charging instructions. Rechargeable batteries should be cycled (fully charged and then fully discharged) two to four times initially to allow them to reach their full capacity. (Note: it is perfectly normal for a battery to become warm to the touch during charging and discharging).
New batteries are hard for your device to charge; they have never been fully charged and are therefore "unformed". Sometimes your device’s charger will stop charging a new battery before it is fully charged. If this happens, simply remove the battery from your device and then reinsert it. The charge cycle should begin again. This may happen several times during your first battery charge. Don’t worry; it’s perfectly normal.
Return to Top
Click Here to download
“What Is The Best Battery?” for more great battery information!
NOTE:
For information you won’t find anywhere else, be sure to request the FREE “Care Tips and Secrets” when you place your order. See what Peter G. of San Francisco had to say about this information in
the “Testimonials” web page. Once you’ve read this information, you’ll understand why we don’t just put it here for all to see.
Disclaimer: Any statements and data in this
file are for general information purposes only, and applies only to the small,
consumer electronics batteries, NiCad, NiMH and Li-Ion batteries, unless otherwise
stated. This represents the latest technical information at the time of
publishing. We reserve the right to change the data in this file or web site
without prior notice. The technical information here is given in a descriptive
way and does not guarantee any properties or enlarge any warranties given. We
cannot control your use or implementation of this information therefore we are not
liable directly or indirectly for any incidental or consequential damages. Our
liability is limited to the replacement of any defective battery we sell you within
the warranty period, or a refund if returned unopened as when ordered in error, etc.
If you need more detailed, technical engineering
data on batteries, try:
http://www.powerstream.com/BatteryFAQ.html
|
